Hawthorne Bridge

The 1,383-foot long Hawthorne Bridge is one of Portland’s busiest bridges, safely carrying approximately 30,000 vehicles and untold pedestrians and cyclists across the Willamette River.

Type: Vertical Lift
Built: 1910
Length: 3552 ft
Width: 73 ft
Lanes: 4
Traffic: 30,000 motor vehicles/day, including 800 TriMet buses, plus 8000 bicycles

Originally constructed in 1910, the Hawthorne Bridge is the oldest operating vertical lift bridge in the United States. The Hawthorne Bridge is one of Portland’s busiest bridges, safely carrying approximately 30,000 cars and trucks, 800 TriMet buses, 8000 bicycles and untold pedestrians daily across the Willamette River. Vertical clearance for river traffic is lower than the other bridges, requiring as many as 200 openings per month. The main span can be raised 110 feet to allow vessels to pass underneath.

Like other vertical lift bridges, the Hawthorne Bridge uses a system of counterweights and cables to move the lift span straight up and down. The operating system is mostly original, but the electrical power and control systems—which were installed in 1975—were upgraded in 1999. Hawthorne’s counterweights each weigh 450 tons and are supported by the bridge’s two towers, which rise 165 feet above the bridge deck. Major structural modifications on the truss spans have included:

  • Removal of the original timber deck and sidewalk

  • Installation of open steel grating deck and concrete and aluminum sidewalks.

  • Widening the sidewalks from 6 feet to 10 feet to allow greater room for pedestrians and cyclists. This resulted in the overall deck width extending out to 72 feet.

The Hawthorne is Oregon’s busiest bicycle and transit bridge, and is one of the centerpieces of Portland’s bike culture. A constant flow of bicyclists, walkers and joggers flows across its wide sidewalks, which offer great views of the river and the city’s skyline.

The Hawthorne’s main river span is made up of six spans for a total length of 1,383 ft. The three spans east of the lift span section are each 209’3” long; the lift span is about 477 ft long; the tower spans (which flank the lift span) are each 244’3.5” long. The towers rise 165 ft above the bridge deck and support the bridge’s two counterweights, which each weigh 450 tons.

The east approach consists of three separate ramps. The Madison Street Viaduct is 1,290 ft long, carries two lanes of westbound traffic toward the bridge and is constructed of simple-span steel girders supporting a concrete deck on reinforced concrete columns and caps. The Hawthorne Street Viaduct is 1,250 ft long, has construction similar to the Madison Street Viaduct and carries two lanes of eastbound traffic away from the bridge. The 549-ft Water Avenue Ramp is a two-lane, two-way ramp built in 1992 that allows eastbound traffic to exit the bridge to SE Water Avenue, and allows westbound traffic access to the bridge from Water Avenue.

Approximately 330 ft long, the west approach is made up of a series of short ramps that connect the bridge with SW Naito Parkway and SW 1st Avenue. The structure is made up of reinforced concrete columns and caps supporting a concrete deck and prestressed concrete beams. In 1999 sidewalks and ramps were added to the west approach to improve access for pedestrians, cyclists and the disabled.

The Hawthorne Bridge was designed by Waddell and Harrington, Consulting Engineers from Kansas City, MO and constructed by the Pennsylvania Steel Co. and United Engineering and Construction and Robert Wakefield. It opened to traffic on December 19, 1910.

The bridge is named for Dr. James C. Hawthorne (1819 - 1881), a physician and politician who co-founded the Oregon Asylum for the Insane on what is now SE Hawthorne Blvd. in the 1850's.

Location map
Last reviewed November 7, 2017